How can we help you?

The text located in the table cells can be rotated 90 degrees to the left/right or positioned vertically.

To do this, follow these steps:

1.Specify the required cells:

To rotate text or change the orientation of text in a single cell, select the cell, a piece of text in the cell, the entire text in the cell, or place the cursor in the cell.

To rotate text or change the orientation of text in multiple cells, columns, or rows, select these table elements.

To rotate text or change the orientation of text in the entire table, select the entire table.

2.Open the list of commands in one of the following ways:

In the Command menu, select Format > Rotate Text.

On the Toolbar, in the Paragraph section, click t_alignment_rotate Rotate Text.

3.Run the required command:

To rotate the text, run the Rotate Left 90° or Rotate Right 90° command.

To arrange the text vertically, use the Vertical Text command.

The rotation or orientation angle is applied to all text in the cell. You cannot have multiple pieces of text with different rotation angles or orientations in the same cell.

To return to the default display of text in cells (horizontal, 0°), follow these steps:

1.Specify the cells as described above.

2.Run the command in one of the following ways:

In the Command menu, select Format > Rotate Text > None (0°).

On the Toolbar, in the Paragraph section, click t_alignment_rotate Rotate Text. In the opened sub-menu, select None (0°).

Was this helpful?
Yes
No
Previous
Alignment and spacing
Next
Lists