How can we help you?

Horizontal alignment

You can align text within an object horizontally in the following ways:

To the left edge of the object

To the center of the object

To the right edge of the object

Justify: Along the left and right edges of the object

Evenly horizontally distributed within the object

To align text horizontally, follow the steps below:

1.Select the text for which you want to adjust the alignment:

To align a single paragraph, select that paragraph/part of that paragraph or place the cursor in it.

To align multiple paragraphs, select them in their entirety.

To align all text within an object in color, select the object or select all text within the object.

2.Run one of the commands shown in the table below.

Text alignment

Command menu item

Button in Paragraph section of Toolbar

Keyboard shortcut

Align Left

Format > Alignment > Left

editor_alignment_left_icon

Ctrl+L

Center

Format > Alignment > Center

editor_alignment_center_icon_gray

Ctrl+E

Align Right

Format > Alignment > Right

editor_alignment_right_icon

Ctrl+R

Justify

Format > Alignment > Justify

editor_alignment_justify_icon_gray

Ctrl+J

Distribute Horizontally

Format > Alignment > Distribute Horizontally

distribute_horizontally

Horizontal alignment takes place within the indents specified for the paragraph being edited.

If the text in a cell is rotated, horizontal alignment is carried out according to its position in space: the text is moved relative to the upper and lower cell borders.

 Vertical alignment

You can vertically align text inside an object: along the top, in the middle, or along the bottom.

To do this, follow these steps:

1.Select the object where you want to align the text:

To align text within any object other than a table, select the object with a single or double click.

To align text in a table, select it with a single click.

To align text in one or more cells in a table, select those cells.

2.Run one of the commands shown in the table below.

Cell position

Command menu item

Toolbar button, Paragraph

Top

Format > Alignment > Top

editor_vertical_alignment_top_icon

Middle

Format > Alignment > Middle

editor_vertical_alignment_middle_icon

Bottom

Format > Alignment > Bottom

editor_vertical_alignment_bottom_icon

If the text in a cell is rotated, vertical alignment is carried out according to its position in space: the text is moved relative to the left and right cell borders.

Line spacing

Line spacing is the space between each line in a paragraph. The default line spacing multiplier for all text is 0.90.

If necessary, you can change the line spacing. You can select a line spacing value from predefined values or specify your own.

Predefined spacing

When you select a predefined value, the line spacing is equal to the product of the font size by the specified value. For example, if you use 12 pt font and double line spacing for the paragraph, the line spacing in the paragraph is 24 pt (12 pt x 2).

To set a predefined line spacing, do the following:

1.Select the text fragment you want to format.

To set a predefined spacing for a single paragraph, select that paragraph/part of that paragraph or place the cursor in it.

To set a predefined spacing for multiple paragraphs, select the entire paragraph.

To set a predefined spacing for all text within an object, select the object or select all text within the object.

2.On the Toolbar, in the Paragraph section, click the button that displays the current spacing value. For example, lines_space.

3.In the list that opens, select the desired predefined value.

Custom spacing

To set a custom line spacing, do the following:

1.Select the text for which you want to set a custom spacing:

To set a custom spacing for a single paragraph, select that paragraph/part of that paragraph or place the cursor in it.

To set a custom spacing for multiple paragraphs, select the entire paragraph.

To set a custom spacing for all text within an object, select the object or select all text within the object.

2.On the Toolbar, in the Paragraph section, click the button that displays the current spacing value. For example, lines_space.

3.In the list that expands, click Custom Line Spacing.

4.In the Custom Line Spacing window, in the drop-down list on the left, specify the method of spacing calculation:

Multiply: Sets the line spacing which is increased or decreased according to the specified multiplier. A multiplier of 1.00 corresponds to a single line spacing. Select the multiplier greater than 1.00 to increase the spacing. For example, setting a multiplier to 1.2 will increase the space by 20%. Select the multiplier of less than 1.00 to reduce the spacing. For example, setting a multiplier to 0.7 will reduce the spacing by 30%.

Exact: Sets a fixed spacing equal to the value specified in the field on the right. The value is measured in points (pt). Unlike the predefined spacing, the fixed spacing is not changed when the font is reduced/increased.

At Least: Sets the minimum allowed spacing, equal to the value specified in the field on the right. The value is measured in points (pt). When you increase the font size or add characters to a line whose height differs from the main font (for example, superscript and subscript characters), the line spacing value is calculated automatically.

4.In the field on the right, enter the numeric value for the selected calculation method.

5.Click OK.

Character spacing

The character spacing allows you to set the spacing between the characters being entered into the text. You can choose between the following options: condensed, normal, and expanded character spacing.

The figure below shows examples of how each of the spacings is displayed:

intercharacter_spacing

You can select the character spacing type using the Command menu or the Toolbar.

To change the character spacing type using the Command menu, follow these steps:

1.Select the text you want to customize the character spacing:

To set the character spacing in a single word, place the cursor in the word or select the entire word.

To set the character spacing in a piece of text, select the entire text.

To set the character spacing for all text within an object, select the object or select all text within the object.

2.In the Command menu, select Format > Font > Character Spacing.

3.In the sub-menu that opens, select the desired spacing type.

To change the character spacing using the Toolbar, follow the steps below:

1.Select the text where you want to set the character spacing as described above.

2.On the Toolbar, in the Font section, click t_more.

3.Select the desired character spacing type:

editor_spacing_condenced_icon Condensed

editor_spacing_normal_icon Normal

editor_spacing_expanded_icon Expanded

Paragraph spacing and indents

To customize spacing and indentation for paragraphs, follow the steps below:

1.Select the required text:

To change the settings of a single paragraph, select that paragraph/part of that paragraph or place the cursor in it.

To change the settings of multiple paragraphs, select these paragraphs entirely.

To change the settings for all text within an object, select the object or select all text within the object.

2.On the Toolbar, in the Paragraph section, click paragraph_settings Paragraph Settings.

3.In the window that appears, enter the required numeric values for the following parameters:

First Line: The distance from the left border of the object to the first line in the paragraph.

Left Indent: The distance from the left border of the object to the paragraph.

Right Indent: The distance from the right border of the object to the paragraph.

Before: The spacing between the current paragraph and the previous paragraph.

After: The spacing between the current paragraph and the next paragraph.

To quickly increase the paragraph indent by 1.25 cm, do one of the following:

In the Command menu, select Format > Alignment > Increase Indent.

On the Toolbar, in the Paragraph section, click editor_increase_indent_icon Increase Indent.

To quickly decrease a paragraph indent by 1.25 inch, follow one of the steps below:

In the Command menu, select Format > Alignment > Decrease Indent.

On the Toolbar, in the Paragraph section, click editor_decrease_indent_icon Decrease Indent.

Was this helpful?
Yes
No
Previous
Highlight color
Next
Rotate text